Aller au contenu principal

Ce tutoriel a des changements plus récents. Passer à la dernière version non vérifiée.

D-Link DCS-825L Antenna Replacement

Ce dont vous avez besoin

  1. D-Link DCS-825L Antenna Replacement, Accent Ring: étape 1, image 1 de 1
    • Grasp the side of the accent ring. There is a notch that your thumb will be able to grab ahold of.

  2. D-Link DCS-825L Antenna Replacement: étape 2, image 1 de 1
    • Twist the accent ring until it pops off. You may need to use both hands if the accent ring is stuck.

  3. D-Link DCS-825L Antenna Replacement: étape 3, image 1 de 1
    • Replace your accent ring with whichever color you choose.

  4. D-Link DCS-825L Antenna Replacement, Back Casing: étape 4, image 1 de 2 D-Link DCS-825L Antenna Replacement, Back Casing: étape 4, image 2 de 2
    • Remove one Phillips #2 screw from each side of the camera lens.

  5. D-Link DCS-825L Antenna Replacement: étape 5, image 1 de 3 D-Link DCS-825L Antenna Replacement: étape 5, image 2 de 3 D-Link DCS-825L Antenna Replacement: étape 5, image 3 de 3
    • Pull the Wi-Fi Baby Camera open.

    • It should be easily done after the screws are removed.

  6. D-Link DCS-825L Antenna Replacement: étape 6, image 1 de 2 D-Link DCS-825L Antenna Replacement: étape 6, image 2 de 2
    • Take your tweezers and gently pull the white tip out from its plug that is connected to a red and black twisted wire.

  7. D-Link DCS-825L Antenna Replacement: étape 7, image 1 de 3 D-Link DCS-825L Antenna Replacement: étape 7, image 2 de 3 D-Link DCS-825L Antenna Replacement: étape 7, image 3 de 3
    • Take your tweezers and gently pull the white tip that is on the end of the white wire (the antenna) out from its plug in.

  8. D-Link DCS-825L Antenna Replacement, Antenna: étape 8, image 1 de 1
    • Once you have the back casing removed from the other half of the device, it should look like this with the antenna poking out.

  9. D-Link DCS-825L Antenna Replacement: étape 9, image 1 de 3 D-Link DCS-825L Antenna Replacement: étape 9, image 2 de 3 D-Link DCS-825L Antenna Replacement: étape 9, image 3 de 3
    • There will be a light yellow rubber stopper that is holding the antenna in place.

    • With your tweezers, gently tug on the stopper to make it come out, or at least come loose.

    • If the stopper does not completely come out, use the round top of the antenna to push down on it.

    • You can do this simply by pulling the antenna as close to the back casing as possible, and then pushing down on it until the rubber stopper comes out completely.

    • After it has come out, it can either be taken off from the antenna and set aside, or it can be kept on.

  10. D-Link DCS-825L Antenna Replacement: étape 10, image 1 de 2 D-Link DCS-825L Antenna Replacement: étape 10, image 2 de 2
    • Once the rubber stopper has been pushed out, you will now be able to easily pull the antenna out from the back casing.

    • After it has been removed, you are now able to replace the antenna of your Wi-Fi Baby Camera.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Alexis Clopton

Membre depuis le 10/09/18

97 Réputation

1 tutoriel rédigé

Équipe

USF Tampa, Team S1-G5, Leahy Fall 2018 Membre de l'équipe USF Tampa, Team S1-G5, Leahy Fall 2018

USFT-LEAHY-F18S1G5

4 membres

4 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 4

Total : 447