Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Pièces & Outils

Introduction

Did the back casing of your Wi-Fi Baby Camera crack? The answer to fixing and replacing that is in this guide.

  1. Grasp the side of the accent ring. There is a notch that your thumb will be able to grab ahold of.
    • Grasp the side of the accent ring. There is a notch that your thumb will be able to grab ahold of.

  2. Twist the accent ring until it pops off. You may need to use both hands if the accent ring is stuck.
    • Twist the accent ring until it pops off. You may need to use both hands if the accent ring is stuck.

  3. Replace your accent ring with whichever color you choose.
    • Replace your accent ring with whichever color you choose.

  4. Kits pour Nintendo Switch

    Une solution rapide pour reprendre le jeu

    Acheter un kit pour Switch

    Kits pour Nintendo Switch

    Une solution rapide pour reprendre le jeu

    Acheter un kit pour Switch
  5. Remove one Phillips #2 screw from each side of the camera lens. Remove one Phillips #2 screw from each side of the camera lens.
    • Remove one Phillips #2 screw from each side of the camera lens.

  6. Pull the Wi-Fi Baby Camera open. It should be easily done after the screws are removed. It should be easily done after the screws are removed.
    • Pull the Wi-Fi Baby Camera open.

    • It should be easily done after the screws are removed.

  7. Take your tweezers and gently pull the white tip out from its plug that is connected to a red and black twisted wire. Take your tweezers and gently pull the white tip out from its plug that is connected to a red and black twisted wire.
    • Take your tweezers and gently pull the white tip out from its plug that is connected to a red and black twisted wire.

  8. Take your tweezers and gently pull the white tip that is on the end of the white wire (the antenna) out from its plug in. Take your tweezers and gently pull the white tip that is on the end of the white wire (the antenna) out from its plug in. Take your tweezers and gently pull the white tip that is on the end of the white wire (the antenna) out from its plug in.
    • Take your tweezers and gently pull the white tip that is on the end of the white wire (the antenna) out from its plug in.

Conclusion

To reassemble your device, follow these instructions in reverse order.

April Ulrich

Membre depuis le 09/10/2018

205 Réputation

2 tutoriels rédigés

Équipe

USF Tampa, Team S1-G5, Leahy Fall 2018 Membre de l'équipe USF Tampa, Team S1-G5, Leahy Fall 2018

USFT-LEAHY-F18S1G5

4 membres

4 tutoriels rédigés

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 3

Total : 184