Réparez vos affaires Communauté Boutique

D-Link DCS-825L LED Light Cover Replacement

Introduction

Does the LED light cover have a crack on the outer cap? Is it yellowed or discolored? This guide will show you the way to replace the LED light cover for your Wi-Fi Baby Camera.

Ce dont vous avez besoin

  1. D-Link DCS-825L LED Light Cover Replacement, Accent Ring: étape 1, image 1 de 1

    • Grasp the side of the accent ring. There is a notch that your thumb will be able to grab ahold of.

    Modifier

  2. D-Link DCS-825L LED Light Cover Replacement: étape 2, image 1 de 1

    • Twist the accent ring until it pops off. You may need to use both hands if the accent ring is stuck.

    Modifier

  3. D-Link DCS-825L LED Light Cover Replacement: étape 3, image 1 de 1

    • Replace your accent ring with whichever color you choose.

    Modifier

  4. D-Link DCS-825L LED Light Cover Replacement, Back Casing: étape 4, image 1 de 2 D-Link DCS-825L LED Light Cover Replacement, Back Casing: étape 4, image 2 de 2

    • Remove one Phillips #2 screw from each side of the camera lens.

    Modifier

  6. D-Link DCS-825L LED Light Cover Replacement: étape 5, image 1 de 3 D-Link DCS-825L LED Light Cover Replacement: étape 5, image 2 de 3 D-Link DCS-825L LED Light Cover Replacement: étape 5, image 3 de 3

    • Pull the Wi-Fi Baby Camera open.

    • It should be easily done after the screws are removed.

    Modifier

  7. D-Link DCS-825L LED Light Cover Replacement: étape 6, image 1 de 2 D-Link DCS-825L LED Light Cover Replacement: étape 6, image 2 de 2

    • Take your tweezers and gently pull the white tip out from its plug that is connected to a red and black twisted wire.

    Modifier

  8. D-Link DCS-825L LED Light Cover Replacement: étape 7, image 1 de 3 D-Link DCS-825L LED Light Cover Replacement: étape 7, image 2 de 3 D-Link DCS-825L LED Light Cover Replacement: étape 7, image 3 de 3

    • Take your tweezers and gently pull the white tip that is on the end of the white wire (the antenna) out from its plug in.

    Modifier

  9. D-Link DCS-825L LED Light Cover Replacement, LED Light Cover: étape 8, image 1 de 1

    • Grab the white cylinder with your thumb and index finger.

    Modifier

  10. D-Link DCS-825L LED Light Cover Replacement: étape 9, image 1 de 1

    • Gently lift the cylinder up from its placement in your Wi-Fi Baby Camera.

    Modifier

  11. D-Link DCS-825L LED Light Cover Replacement: étape 10, image 1 de 1

    • Remove the white cylinder completely to replace it.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 3 autres contributeurs

Annalise Leclair

Membre depuis le 10/09/18

97 Réputation

1 tutoriel rédigé

Badges: 3

Équipe

USF Tampa, Team S1-G5, Leahy Fall 2018 Membre de l'équipe USF Tampa, Team S1-G5, Leahy Fall 2018

USFT-LEAHY-F18S1G5

4 membres

4 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 1

Total : 290