Introduction

I phoned D-Link tech support several times, and they eventually concluded my device was broken, but I got it fixed.

My D-Link dhp w306av would do nothing but blink it's blue (WPS/ENY) LED. None of the support people could fix it with any kind of reset. This is what I managed to do.

  1. (With router unpluged, and no ethernet cable attched) Turn the router on (push in the power button on the side) remember it's not plugged into the wall yet.
    • (With router unpluged, and no ethernet cable attched) Turn the router on (push in the power button on the side) remember it's not plugged into the wall yet.

    Ajouter un commentaire

  2. Répandez la magie de Noël
    Obtenez 12 $ de réduction sur les commandes de 50 $ ou plus avec le code FIXMAS12
    Répandez la magie de Noël
    Obtenez 12 $ de réduction sur les commandes de 50 $ ou plus avec le code FIXMAS12
  3. Take a pin or micro screwdriver and push in and hold the reset button.
    • Take a pin or micro screwdriver and push in and hold the reset button.

    • Still holding the reset button plug the router into a power outlet.

    • Keep holding down the reset button for at least 15 seconds.

    • If you have the same luck I did your green lights on the side will start to cycle and light up.

    • Now you can go back to your quick install guide that came with the router and set it up again.

    Ajouter un commentaire

Conclusion

hope it works for you

4 autre(s) ont terminé cette réparation.

alan

Membre depuis le 23/08/2013

212 Réputation

1 tutoriel rédigé

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 8

7 derniers jours : 24

30 derniers jours : 149

Total : 4,116