Introduction
Hi everyone, In this guide, I'll show you how to disassemble to replace the main parts of the DJI Mini 3 Pro drone.
Additional Information
After replacing the drone's GPS module, you will need to calibrate the drone in the DJI Fly mobile app.
To replace the ESC board and drone arms, you will need a soldering iron.
After replacing the motherboard, you will need to calibrate the gimbal camera.
Use this manual to calibrate the gimbal camera https://youtu.be/mu03HWXplM4
Ce dont vous avez besoin
Instructions vidéo
To reassemble your device, follow these instructions.
To reassemble your device, follow these instructions.
Annulation : je n'ai pas terminé ce tutoriel.
5 autres ont terminé cette réparation.
0 commentaires