Réparez vos affaires Communauté Boutique

DJI Phantom 4 Advanced Remote Controller Motherboard Replacement

Introduction

This guide will show you how to remove and replace the motherboard of the DJI Phantom 4 Advanced Remote Controller.

Before you begin:

  • Please make sure to completely power off the the controller prior to any replacements.
  • Please read the guide before any replacements in order to familiarize yourself with the process.

Ce dont vous avez besoin

  1. DJI Phantom 4 Advanced Remote Controller Motherboard Replacement, Back Panel: étape 1, image 1 de 1

    • Remove the four screws with a Torx T8 screwdriver to access the back con board.

    Traduire

  2. DJI Phantom 4 Advanced Remote Controller Motherboard Replacement: étape 2, image 1 de 2 DJI Phantom 4 Advanced Remote Controller Motherboard Replacement: étape 2, image 2 de 2

    • Remove three screws using a Phillips #00 screwdriver.

    Traduire

  3. DJI Phantom 4 Advanced Remote Controller Motherboard Replacement: étape 3, image 1 de 2 DJI Phantom 4 Advanced Remote Controller Motherboard Replacement: étape 3, image 2 de 2

    • With tweezers, gently remove the large con board tab.

    • Use your hands to remove the two small clips. Pull out from the socket, in a horizontal direction.

    Traduire

  5. DJI Phantom 4 Advanced Remote Controller Motherboard Replacement: étape 4, image 1 de 2 DJI Phantom 4 Advanced Remote Controller Motherboard Replacement: étape 4, image 2 de 2

    • Peel off the rubber grips to access the screw holes.

    • Make sure to save your grips and do not to get them stuck to anything, you are going to want to save the adhesive.

    • Remove the back board and set it aside.

    Traduire

  6. DJI Phantom 4 Advanced Remote Controller Motherboard Replacement: étape 5, image 1 de 2 DJI Phantom 4 Advanced Remote Controller Motherboard Replacement: étape 5, image 2 de 2

    • Pull apart the back plastic panel.

    • Recommended tool for this would be the metal spudger, but not required.

    • Once the back panel is off, you will have access to the motherboard.

    Traduire

  7. DJI Phantom 4 Advanced Remote Controller Motherboard Replacement, Motherboard: étape 6, image 1 de 3 DJI Phantom 4 Advanced Remote Controller Motherboard Replacement, Motherboard: étape 6, image 2 de 3 DJI Phantom 4 Advanced Remote Controller Motherboard Replacement, Motherboard: étape 6, image 3 de 3

    • Disconnect ribbon tabs 1,2,5,8G, and 3.

    • Remove ribbon tab by pulling gently along motherboard. Do not pull straight out.

    • Then remove the plugs

    Traduire

  8. DJI Phantom 4 Advanced Remote Controller Motherboard Replacement: étape 7, image 1 de 2 DJI Phantom 4 Advanced Remote Controller Motherboard Replacement: étape 7, image 2 de 2

    • With the Phillips #00 screwdriver, remove the two Phillips screws.

    Traduire

  9. DJI Phantom 4 Advanced Remote Controller Motherboard Replacement: étape 8, image 1 de 1

    • Double check to make sure all tabs, plugs and screws are removed or disconnected.

    • Gently lift motherboard out of the case.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autres ont terminé cette réparation.

Auteur

avec 6 autres contributeurs

cade knott

Membre depuis le 10/02/18

481 Réputation

3 tutoriels rédigés

Badges: 12

+ 9 badges supplémentaires

Équipe

Linn Benton Community College, Team S1-G4, Johnson Fall 2018 Membre de l'équipe Linn Benton Community College, Team S1-G4, Johnson Fall 2018

LBCC-JOHNSON-F18S1G4

3 membres

12 tutoriels rédigés

2 commentaires

Do you know here can i buy a main board for phantom 4 advanced remote controller?

carl_darklife - Réponse

I would like to know too, can’t find one anywhere

Luke James -

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 4

30 derniers jours : 16

Total : 1,968