Aller au contenu principal

Introduction

Replacing the o-ring is simple. This would be done to replace a damaged or dried o-ring.

  1. Flip open the top panel to reveal water reservoir. Grab the water reservoir by the handle and lift out.
    • Flip open the top panel to reveal water reservoir.

    • Grab the water reservoir by the handle and lift out.

  2. Reach into the reservoir while holding it from the bottom.
    • Reach into the reservoir while holding it from the bottom.

    • Push up the piston.

    • While pushing the piston up, pull the O-ring out.

Conclusion

To reassemble your device, follow these instructions in reverse order.

David Griffith

Membre depuis le 01/10/2015

1 441 Réputation

9 tutoriels rédigés

Équipe

Cal Poly, Team 4-2, Maness Fall 2015 Membre de l'équipe Cal Poly, Team 4-2, Maness Fall 2015

CPSU-MANESS-F15S4G2

4 membres

18 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 11

30 derniers jours : 38

Total : 2,740