Réparez vos affaires Communauté Boutique

DeWalt D26451 Pad Replacement

Introduction

The DeWalt D26451 disc pad can experience several malfunctions. It may refuse to hold your sandpaper, it may be collecting unwanted debris, or it may just be worn out and in need of replacement.

In this repair guide, we will be teaching you how to replace the disc pad on the DeWalt D26451. You can order a replacement pad here.

Ce dont vous avez besoin

  1. DeWalt D26451 Pad Replacement, Pad: étape 1, image 1 de 3 DeWalt D26451 Pad Replacement, Pad: étape 1, image 2 de 3 DeWalt D26451 Pad Replacement, Pad: étape 1, image 3 de 3

    • Please wear safety glasses while completing this replacement guide.

    • Insert the 60 mm extension into the screw driver which has the t15 torx bit installed in order to make a t-handle grip.

    • Turn the screwdriver counter-clockwise to loosen all three screws in the disc pad.

    Modifier

  3. DeWalt D26451 Pad Replacement: étape 2, image 1 de 2 DeWalt D26451 Pad Replacement: étape 2, image 2 de 2

    • Turn the disc pad over and remove the loosened screws.

    • When the screws are removed, the disc pad will come off of the sander.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Auteur

avec 4 autres contributeurs

Shelby LeQuire

Membre depuis le 01/29/16

639 Réputation

5 tutoriels rédigés

Badges: 13

+ 10 badges supplémentaires

Équipe

Western Carolina University, Team 1-2, Virtue Spring 2016 Membre de l'équipe Western Carolina University, Team 1-2, Virtue Spring 2016

WCU-VIRTUE-S16S1G2

6 membres

5 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 7

30 derniers jours : 23

Total : 2,216