Introduction
To access the rest of the inside of the drill, you will have to remove the handle cover from the chassis. Follow the guide to remove the handle cover.
-
-
Remove the three screws with a Tr20 hex bit screwdriver.
-
Remove the back cover.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
Une autre personne a terminé cette réparation.
Équipe
University of North Texas, Team 3-6, Coppersmith Fall 2023 Membre de l'équipe University of North Texas, Team 3-6, Coppersmith Fall 2023
UNT-COPPERSMITH-F23S3G6
4 membres
3 tutoriels rédigés
