Introduction
Follow this guide to replace the power cord to the drill, refer to the troubleshooting guide to determine if you need to replace the power cord. Troubleshooting guide
Ce dont vous avez besoin
-
-
Remove the three screws with a Tr20 hex bit screwdriver.
-
Remove the back cover.
-
-
The power cord will now be disconnect and you can replace it with a new one.
To reassemble your device, follow these instructions in reverse order.
The power cord will now be disconnect and you can replace it with a new one.
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
3 autres ont terminé cette réparation.