Réparez vos affaires Communauté Boutique

DeWalt DW660 Motor Brushes Replacement

Introduction

The motor inside the DW660 uses two carbon brushes which transfer electricity to the rotor by sliding over the copper commutator. The brushes wear out over time with regular use, so they will eventually need to be replaced.

Ce dont vous avez besoin

  1. DeWalt DW660 Motor Brushes Replacement, Motor Brushes: étape 1, image 1 de 2 DeWalt DW660 Motor Brushes Replacement, Motor Brushes: étape 1, image 2 de 2

    • Remove the four 19mm T20 Torx screws at the rear of the device.

    Modifier

  2. DeWalt DW660 Motor Brushes Replacement: étape 2, image 1 de 3 DeWalt DW660 Motor Brushes Replacement: étape 2, image 2 de 3 DeWalt DW660 Motor Brushes Replacement: étape 2, image 3 de 3

    • Remove the other part of the back casing.

    • Unplug the black and white power wires from the motor.

    Modifier

  4. DeWalt DW660 Motor Brushes Replacement: étape 3, image 1 de 2 DeWalt DW660 Motor Brushes Replacement: étape 3, image 2 de 2

    • Pinch the blue brush wire between two fingers.

    • Pull on the wire, removing them from the motor.

    Modifier

  5. DeWalt DW660 Motor Brushes Replacement: étape 4, image 1 de 2 DeWalt DW660 Motor Brushes Replacement: étape 4, image 2 de 2

    • Using the metal spudger, lift up the coil spring that holds the carbon brushes in place.

    • While the spring is lifted up, remove the carbon brush by simply sliding it out of the slot.

    Modifier

  6. DeWalt DW660 Motor Brushes Replacement: étape 5, image 1 de 2 DeWalt DW660 Motor Brushes Replacement: étape 5, image 2 de 2

    • Repeat steps 3 and 4 to remove the other carbon brush.

    • When installing the new carbon brushes, make sure each brushes' lead wire is plugged into opposite ends of the motor.

    • Refer to the photos for visual assistance.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Auteur

avec 3 autres contributeurs

Joseph Pacitto

Membre depuis le 03/23/16

239 Réputation

2 tutoriels rédigés

Badges: 8

+ 5 badges supplémentaires

Équipe

UMass Dartmouth, Team 2-7, Isaacson Spring 2016 Membre de l'équipe UMass Dartmouth, Team 2-7, Isaacson Spring 2016

UMASSD-ISAACSON-S16S2G7

3 membres

5 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 9

30 derniers jours : 19

Total : 1,407