DeWalt DW920 Rotational Switch Replacement

Introduction

A non-functional rotation switch might be one of the many reasons your drill is not working as it should. This is a step-by step guide on how to replace the rotation switch. This is necessary when your drill isn't rotating and working. Using this guide, you will be able to fix your drill and continue to use it. To fix this you do not need any special skills. You can just follow this step by step process to get it done.

Ce dont vous avez besoin

Étape 1 Disassembly

DeWalt DW920 Rotational Switch Replacement, Disassembly: étape 1, image 1 de 1

Using an H-5.0 bit driver remove the four T-10 Torx screws.

Modifier

Étape 2

Use 2 H-5.0 bit drivers to take out the main bolt and head.
There will be blue locktite on the tread.

Modifier

Étape 3

Carefully remove the two halves of the handle.

Modifier

Étape 4 Rotational Switch

DeWalt DW920 Rotational Switch Replacement, Rotational Switch: étape 4, image 1 de 1

Locate the rotational switch

Modifier

Étape 5

Carefully release the connection between the rotational switch and the motor assembly. This should be done carefully to ensure that the switch connection switch on the assembly is not damaged.

Modifier