Introduction
This guide will show how to remove the brush leads on the DeWalt DW938.
Ce dont vous avez besoin
-
-
Use a torque bit screw driver to remove the T10 18.3 mm screw on the handle.
-
Use a torque bit screw driver to remove 6 T10 21.5 mm screws on the handle.
-
-
-
-
Push in locking clips to remove the brush head.
-
Repeat for the other brush.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
Une autre personne a terminé cette réparation.