Aller au contenu principal

DeWalt DW997 Motor Replacement

Ce dont vous avez besoin

  1. DeWalt DW997 Motor Replacement, Speed Switch: étape 1, image 1 de 2 DeWalt DW997 Motor Replacement, Speed Switch: étape 1, image 2 de 2
    • Remove seven 21 mm Torx T15 screws.

    • Remove one 18 mm Torx T10 screw.

    • After removing all screws, lift up the top yellow cover.

    • The yellow cover should easily lift up, if not, check for unscrewed screws.

    • Do not pry the two yellow covers apart, they can crack.

  2. DeWalt DW997 Motor Replacement: étape 2, image 1 de 1
    • Lift the components out of the casing. These include: motor, gear assembly, trigger assembly and chuck.

  3. DeWalt DW997 Motor Replacement: étape 3, image 1 de 1
    Outil utilisé dans cette étape :
    Tweezers
    $4.99
    J'achète
    • Using the tweezers, grab the metal leg on either side of the switch and lift it outwards from the case.

  4. DeWalt DW997 Motor Replacement: étape 4, image 1 de 1
    • Remove the other leg manually, it should easily come out.

  5. DeWalt DW997 Motor Replacement, Motor: étape 5, image 1 de 2 DeWalt DW997 Motor Replacement, Motor: étape 5, image 2 de 2
    • Use a Torx T10 screw bit to remove the four 11mm screws around the motor.

  6. DeWalt DW997 Motor Replacement: étape 6, image 1 de 2 DeWalt DW997 Motor Replacement: étape 6, image 2 de 2
    • Pull off the two wires that connect the motor to the trigger.

    • Be careful while pulling the wires as they can tear.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Kevin

Membre depuis le 09/12/16

140 Réputation

1 tutoriel rédigé

Équipe

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 5

30 derniers jours : 16

Total : 2,223