Introduction
The armature allows electrical current to go through the device and provide power to the grinding wheel. Without the armature, there would be no torque or power to spin the grinder. This guide will show how to replace it.
Ce dont vous avez besoin
-
-
Remove the four T15 Torx screws from the front of the grinder and remove the face plate from the body.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
3 autres ont terminé cette réparation.
Équipe
Oregon Institute of Technology, Team S2-G9, Lancaster Spring 2019 Membre de l'équipe Oregon Institute of Technology, Team S2-G9, Lancaster Spring 2019
OIT-LANCASTER-S19S2G9
4 membres
5 tutoriels rédigés
