Réparez vos affaires Communauté Boutique

Dell Alienware 13 Touch pad Replacement

Introduction

This guide will show the user how to replace a broken touch pad that is not functioning properly on a Dell Alienware 13 laptop.

Ce dont vous avez besoin

  1. Dell Alienware 13 Touch pad Replacement, Base Panel: étape 1, image 1 de 1

    • Working on an electrical device while plugged in can cause injury due to electrical shock. Ensure that all external power is disconnected from the device.

    • Close the device and turn the device over.

    Modifier

  2. Dell Alienware 13 Touch pad Replacement: étape 2, image 1 de 1

    • Remove (2) 5 mm Phillips head screws attaching the small access panel to the base using a Phillips # 1 screwdriver.

    • The (2) screws are attached to the base panel with retaining clips and won't completely detach from the panel.

    Modifier

  3. Dell Alienware 13 Touch pad Replacement: étape 3, image 1 de 3 Dell Alienware 13 Touch pad Replacement: étape 3, image 2 de 3 Dell Alienware 13 Touch pad Replacement: étape 3, image 3 de 3

    • Remove the small access panel using a heavy duty spudger.

    Modifier

  4. Dell Alienware 13 Touch pad Replacement, Touch pad: étape 4, image 1 de 2 Dell Alienware 13 Touch pad Replacement, Touch pad: étape 4, image 2 de 2

    • Disconnect the battery cable from the battery cable terminal.

    Modifier

  5. Dell Alienware 13 Touch pad Replacement: étape 5, image 1 de 1

    • Remove (4) 6 mm Phillips head screws from the solid-state metal drive bracket, using a Phillips # 1 screwdriver.

    Modifier

  6. Dell Alienware 13 Touch pad Replacement: étape 6, image 1 de 2 Dell Alienware 13 Touch pad Replacement: étape 6, image 2 de 2

    • Grab the pull tab to pivot the solid-state drive bracket upwards. Remove the bracket from the computer base.

    Modifier

  8. Dell Alienware 13 Touch pad Replacement: étape 7, image 1 de 2 Dell Alienware 13 Touch pad Replacement: étape 7, image 2 de 2

    • Using the pull tab, disconnect the black solid-state drive cable from the system board.

    Modifier

  9. Dell Alienware 13 Touch pad Replacement: étape 8, image 1 de 1

    • Remove (2) 3 mm Phillips head screws, using a Phillips # 0 screwdriver, that connect the solid-state drive assembly to the computer base.

    Modifier

  10. Dell Alienware 13 Touch pad Replacement: étape 9, image 1 de 2 Dell Alienware 13 Touch pad Replacement: étape 9, image 2 de 2

    • Lift up on the solid-state drive assembly to remove it from the computer base.

    Modifier

  11. Dell Alienware 13 Touch pad Replacement: étape 10, image 1 de 2 Dell Alienware 13 Touch pad Replacement: étape 10, image 2 de 2

    • Locate two cables labeled, "KB Backlight" (orange) and "KB Membrane" (black). Lift up on the latches to disconnect the cables from the system board.

    Modifier

  12. Dell Alienware 13 Touch pad Replacement: étape 11, image 1 de 3 Dell Alienware 13 Touch pad Replacement: étape 11, image 2 de 3 Dell Alienware 13 Touch pad Replacement: étape 11, image 3 de 3

    • Remove (8) 9 mm Phillips head screws using a Phillips # 1 screwdriver, that secures the palm-rest assembly to the computer base.

    • Remove (4) 8 mm Phillips head screws using a Phillips # 1 screwdriver.

    • Remove (2) 7 mm Phillips head screws using a Phillips # 1 screwdriver.

    Modifier

  13. Dell Alienware 13 Touch pad Replacement: étape 12, image 1 de 2 Dell Alienware 13 Touch pad Replacement: étape 12, image 2 de 2

    • Lift the computer base slightly towards you and push the release tabs on the palm-rest assembly until it pops out using a spudger.

    Modifier

  14. Dell Alienware 13 Touch pad Replacement: étape 13, image 1 de 3 Dell Alienware 13 Touch pad Replacement: étape 13, image 2 de 3 Dell Alienware 13 Touch pad Replacement: étape 13, image 3 de 3

    • Turn the computer over and open the display as far as possible.

    • Using a plastic spudger, pry up along the edges of the palm-rest assembly.

    • Gently lift the palm-rest assembly.

    Modifier

  15. Dell Alienware 13 Touch pad Replacement: étape 14, image 1 de 3 Dell Alienware 13 Touch pad Replacement: étape 14, image 2 de 3 Dell Alienware 13 Touch pad Replacement: étape 14, image 3 de 3

    • Lift the connector latch and disconnect the power-button board cable from the system board. Identified as a cable with a blue tab.

    • Lift the palm-rest assembly off the computer base.

    Modifier

  16. Dell Alienware 13 Touch pad Replacement: étape 15, image 1 de 2 Dell Alienware 13 Touch pad Replacement: étape 15, image 2 de 2

    • Disconnect the touch pad cable from the touch pad.

    Modifier

  17. Dell Alienware 13 Touch pad Replacement: étape 16, image 1 de 3 Dell Alienware 13 Touch pad Replacement: étape 16, image 2 de 3 Dell Alienware 13 Touch pad Replacement: étape 16, image 3 de 3

    • Remove (4) 3 mm Phillips head screws securing the touch pad to the palm rest assembly using a Phillips # 0 screwdriver.

    • Lift up and remove the touch pad from the palm rest assembly.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 3 autres contributeurs

Adam Russell

Membre depuis le 09/26/16

898 Réputation

6 tutoriels rédigés

Badges: 16

+ 13 badges supplémentaires

Équipe

USF Tampa, Team 14-2, Eyestone Fall 2016 Membre de l'équipe USF Tampa, Team 14-2, Eyestone Fall 2016

USFT-EYESTONE-F16S14G2

3 membres

7 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 2

Total : 308