Introduction

In this guide, we will show you how to remove and replace the Battery Pack.

WARNING:   Before working inside your computer, read the safety information that shipped with your  computer and follow the steps in Before     You     Begin.
  • WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before You Begin.

Add Comment

Remove the screws that secure the base cover to the computer base.
  • Remove the screws that secure the base cover to the computer base.

Add Comment

  • Slide the base cover towards the rear of the computer and lift it off the computer base.

Add Comment

  • Align the tabs on the NEW base cover with the slots on the computer base and slide the base cover into place.

Add Comment

  • Replace the screws that secure the base cover to the computer base.

Add Comment

  • WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before You Begin.

Add Comment

  • Remove the screws that secure the battery to the computer base.

Add Comment

  • Disconnect the battery cable from its connector on the system board.

Add Comment

  • Lift the battery pack away from the computer base.

Add Comment

  • Align the tabs on the NEW battery with the slots on the computer base and place the battery on the computer base.

Add Comment

  • Connect the battery cable to its connector on the system board.

Add Comment

  • Replace the screws that secure the battery to the computer base.

Add Comment

Finish Line

One other person completed this guide.

darrius

Member since: 03/26/2018

4,595 Reputation

27 Guides authored

Team

Informative Technologies Inc. Member of Informative Technologies Inc.

Community

15 Members

917 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 9

All Time: 64