Aller au contenu principal

Ce tutoriel a des changements plus récents. Passer à la dernière version non vérifiée.

Dell Axim X30 Button Replacement

Ce dont vous avez besoin

  1. Dell Axim X30 Button Replacement, Buttons: étape 1, image 1 de 2 Dell Axim X30 Button Replacement, Buttons: étape 1, image 2 de 2
    • Remove the four rubber feet with your fingers.

  2. Dell Axim X30 Button Replacement: étape 2, image 1 de 2 Dell Axim X30 Button Replacement: étape 2, image 2 de 2
    • Insert the nylon spudger into the battery cover release slot to remove the battery from the device.

  3. Dell Axim X30 Button Replacement: étape 3, image 1 de 1
    • Remove four 12.7mm JIS #0 screws.

  4. Dell Axim X30 Button Replacement: étape 4, image 1 de 1
    • Remove the back panel with a plastic opening tool. Follow the edge of the device around the entire perimeter.

    • The back panel will pop off easily.

  5. Dell Axim X30 Button Replacement: étape 5, image 1 de 3 Dell Axim X30 Button Replacement: étape 5, image 2 de 3 Dell Axim X30 Button Replacement: étape 5, image 3 de 3
    • Disconnect ribbon cables.

    • You may need to use a little force to disconnect them.

    • Disconnect red and white wired connector for speaker and motherboard battery.

  6. Dell Axim X30 Button Replacement: étape 6, image 1 de 2 Dell Axim X30 Button Replacement: étape 6, image 2 de 2
    • Remove three 12.7mm JIS #0 screws.

  7. Dell Axim X30 Button Replacement: étape 7, image 1 de 1
    • Carefully remove motherboard.

  8. Dell Axim X30 Button Replacement: étape 8, image 1 de 1
    • Remove the two 9.6 mm screws by the speaker and green battery with a JIS #0 screwdriver.

  9. Dell Axim X30 Button Replacement: étape 9, image 1 de 2 Dell Axim X30 Button Replacement: étape 9, image 2 de 2
    • Remove black plastic board.

  10. Dell Axim X30 Button Replacement: étape 10, image 1 de 2 Dell Axim X30 Button Replacement: étape 10, image 2 de 2
    • Remove grey and green membrane buttons.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Jonathan Gulley

Membre depuis le 03/28/18

187 Réputation

1 tutoriel rédigé

Équipe

IUPUI, Team S2-G5, Harley Spring 2018 Membre de l'équipe IUPUI, Team S2-G5, Harley Spring 2018

IUPUI-HARLEY-S18S2G5

3 membres

2 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 2

30 derniers jours : 9

Total : 412