Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.
Ce dont vous avez besoin
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Use a plastic opening tool to gently remove the back panel.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Use your fingers to remove the connecting cable to the battery unit. Firmly grab the cord closest to the motherboard connection and pull straight back.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the four 2mm screws on the sides of the battery.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
To remove the battery, lift up on one side to get your fingers underneath and lift away.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the eight 2mm screws securing the motherboard in place.
-
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Release cable for the LED charging indicator by pulling up on connector.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Pull up on connector tab to release IO board cable.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Pull up on connector tab to release touchpad cable.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Using the #1 Philips screwdriver, remove the two, 2mm screws securing the fan assembly.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Using your fingernails, pull the cooling fan cables loose from the motherboard.
-
Finally, lift the fan assembly away from the computer.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the single 2mm screw securing the IO board to the laptop.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Pull up on the connector to release the IO board cable from the motherboard.
-
Annulation : je n'ai pas terminé ce tutoriel.
3 autres ont terminé cette réparation.
Un commentaire
I’ve never pulled apart a computer before, and this guide was perfect! thanks