Introduction

This guide will show you how to remove and replace the charging port for your Chromebook 3180.

Remove the 7 screws from the back cover with a Phillips #0 screwdriver
  • Remove the 7 screws from the back cover with a Phillips #0 screwdriver

  • Once all 7 screws have been removed, you can start to pry apart the back cover with your Plastic Blade or your fingers. (See pic)

Ajouter un commentaire

  • Using a Phillips #0, remove the 2 screws from the right side hinge.

  • Lift the chromebook base in order to force the hinge in an upward position. This will provide you enough room to remove the charging port.

  • Remove the 2 charging port screws

  • Unplug the charging port connector from the Motherboard

Ajouter un commentaire

  • Disconnect the charging port connector from the motherboard.

  • Replace the charging port if needed by connecting the new charging port connector to the motherboard.

  • Using a Phillips#0, replace the 2 charging port screws.

Ajouter un commentaire

  • Reset the right side hinge back into place by pressing down so the hinge is flush against the chromebook base.

  • Secure with the 2 screws using your phillips #0.

Ajouter un commentaire

  • Secure all 7 screws with a Phillips #0

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autre(s) ont terminé cette réparation.

Jon

Membre depuis le 18/08/2013

2 734 Réputation

17 tutoriels rédigés

Hey Party Person, nice job. I believe you might be the greatest tech to ever hold a screw driver. This song is for you https://youtu.be/ItWIYcD6jas

foshizol - Réponse

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 12

Total : 169