Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Pièces & Outils

Pièces

Aucune pièce spécifiée.

  1. Pop out the rubber pieces and unscrew the 7 screws on the bottom of the computer.
    • Pop out the rubber pieces and unscrew the 7 screws on the bottom of the computer.

    • Open the RAM door in the center remove the hidden screw labeled "KB" just above the RAM sticks.

  2. Using a nylon spudger, push the retaining clips away from the keyboard - there are five along the top row, and two on each side. You can carefully pull the keyboard away from each clip when it's released. The bottom edge of the keyboard will just pull away.
    • Using a nylon spudger, push the retaining clips away from the keyboard - there are five along the top row, and two on each side. You can carefully pull the keyboard away from each clip when it's released. The bottom edge of the keyboard will just pull away.

  3. Kits pour Nintendo Switch

    Une solution rapide pour reprendre le jeu

    Acheter un kit pour Switch

    Kits pour Nintendo Switch

    Une solution rapide pour reprendre le jeu

    Acheter un kit pour Switch
  4. There are two ribbon cables securing the keyboard - data and backlight power. Each ribbon connector must be released by flipping the black retainer up with a fingernail or nylon Uspudger before pulling out the ribbon. First flip up the black retainer on the smaller connector. Slide the cable up and out of the connector.
    • There are two ribbon cables securing the keyboard - data and backlight power. Each ribbon connector must be released by flipping the black retainer up with a fingernail or nylon Uspudger before pulling out the ribbon.

    • First flip up the black retainer on the smaller connector. Slide the cable up and out of the connector.

    • Secondly, flip the black connector up on the larger connector. Slide the cable straight out of the connector, parallel to the case.

    • Remove the keyboard from the case.

  5. Unscrew the surface under the keyboard and remove top plate from the base. Unscrew the surface under the keyboard and remove top plate from the base.
    • Unscrew the surface under the keyboard and remove top plate from the base.

  6. Take the battery out by unscrewing the 5 screws and pulling straight off. Take the battery out by unscrewing the 5 screws and pulling straight off.
    • Take the battery out by unscrewing the 5 screws and pulling straight off.

  7. Remove the hard drive.
    • Remove the hard drive.

Conclusion

To reassemble your device, follow these instructions in reverse order.

3 autre(s) ont terminé cette réparation.

Christian Chavez

Membre depuis le 23/01/2018

726 Réputation

5 tutoriels rédigés

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 3

7 derniers jours : 34

30 derniers jours : 122

Total : 1,834