1. Remove the eight 6mm back panel screws with your J1 phillips head screw driver bit. Use your screw driver to remove the plastic cover  in the center of the laptop.
    • Remove the eight 6mm back panel screws with your J1 phillips head screw driver bit.

    • Use your screw driver to remove the plastic cover in the center of the laptop.

    • Using a J1 phillips head screw driver bit remove the last 6mm screw.

  2. %Livraison gratuite pour toute commande supérieure à 100 $US ou contenant un Pro Tech Toolkit !

    Parcourez notre boutique
  3. Use your metal pry tool to pry around the laptop until the two pieces separate. There will be a ribbon cable holding the two pieces together, be careful not to rip it out of it's socket.
    • Use your metal pry tool to pry around the laptop until the two pieces separate.

    • There will be a ribbon cable holding the two pieces together, be careful not to rip it out of it's socket.

    • Use your metal pry tool to release the connector.

  4. Remove the speaker plug from it's socket. Lift the speaker assembly from the case.
    • Remove the speaker plug from it's socket.

    • Lift the speaker assembly from the case.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Michael Kendziora

Membre depuis le 14/02/2018

775 Réputation

5 tutoriels rédigés

Équipe

USF Tampa, Team S6-G4, Eyestone Spring 2018 Membre de l'équipe USF Tampa, Team S6-G4, Eyestone Spring 2018

USFT-EYESTONE-S18S6G4

4 membres

6 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 62