Introduction

In this guide, we will show you how to remove and replace the Hard Drive.

Pièces

Aucune pièce nécessaire.

WARNING: Before working inside your computer, read the safety information that shipped with your computer. Follow the procedures in Before You Begin.
  • WARNING: Before working inside your computer, read the safety information that shipped with your computer. Follow the procedures in Before You Begin.

  • Remove the three screws that secure the hard drive assembly to the computer base.

Ajouter un commentaire

Pull the pull-tab on the hard drive bracket towards the right to disconnect the hard drive assembly from the interposer.
  • Pull the pull-tab on the hard drive bracket towards the right to disconnect the hard drive assembly from the interposer.

Ajouter un commentaire

  • Pull the pull-tab on the hard drive bracket to lift the hard drive assembly at an angle and out of the hard drive compartment as shown in the illustration.

Ajouter un commentaire

  • Remove the four screws that secure the hard drive bracket to the hard drive and remove the hard drive bracket.

Ajouter un commentaire

  • Replace the hard drive bracket and the four screws that secure the NEW hard drive bracket to the hard drive.

Ajouter un commentaire

  • Place the hard drive assembly in the hard drive compartment.

Ajouter un commentaire

  • Push the hard drive assembly towards the left until it is fully connected to the interposer.

Ajouter un commentaire

  • Replace the three screws that secure the hard drive assembly to the computer base.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Terrence15

Membre depuis le 18/12/2017

69 301 Réputation

444 tutoriels rédigés

Équipe

Informative Technologies Inc. Membre de l'équipe Informative Technologies Inc.

Community

15 membres

917 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 4

30 derniers jours : 11

Total : 35