Réparez vos affaires Communauté Boutique

Dell Inspiron 13-7347 Hard Drive Replacement

Introduction

This guide will show you how to remove and replace the hard drive from a Dell Inspiron 13-7347.

Before you begin, power off the system and unplug all external devices and power sources including the AC adapter.

Before the laptop is opened, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface during the process to prevent electrostatic discharge (ESD).

Ce dont vous avez besoin

  1. Dell Inspiron 13-7347 Hard Drive Replacement, Battery: étape 1, image 1 de 3 Dell Inspiron 13-7347 Hard Drive Replacement, Battery: étape 1, image 2 de 3 Dell Inspiron 13-7347 Hard Drive Replacement, Battery: étape 1, image 3 de 3

    • Flip the device over, so that the back is facing up.

    • Remove the ten, 7 mm, Phillips #1 screws on the back of your Dell Inspiron 13-7347.

    • Use the suction cup to lift off the back case.

    Modifier

  2. Dell Inspiron 13-7347 Hard Drive Replacement: étape 2, image 1 de 3 Dell Inspiron 13-7347 Hard Drive Replacement: étape 2, image 2 de 3 Dell Inspiron 13-7347 Hard Drive Replacement: étape 2, image 3 de 3

    • Remove the three 4 mm JIS #00 screws that secure the battery to the device.

    Modifier

  4. Dell Inspiron 13-7347 Hard Drive Replacement: étape 3, image 1 de 3 Dell Inspiron 13-7347 Hard Drive Replacement: étape 3, image 2 de 3 Dell Inspiron 13-7347 Hard Drive Replacement: étape 3, image 3 de 3

    • Unplug the flat connector that is connected to the battery.

    Modifier

  5. Dell Inspiron 13-7347 Hard Drive Replacement: étape 4, image 1 de 3 Dell Inspiron 13-7347 Hard Drive Replacement: étape 4, image 2 de 3 Dell Inspiron 13-7347 Hard Drive Replacement: étape 4, image 3 de 3

    • Lift the battery steadily from the device.

    • Tilt the battery upward while removing.

    Modifier

  6. Dell Inspiron 13-7347 Hard Drive Replacement, Hard Drive: étape 5, image 1 de 2 Dell Inspiron 13-7347 Hard Drive Replacement, Hard Drive: étape 5, image 2 de 2

    • Using a Phillips #0 screwdriver, loosen and remove the two 3.0 mm hard drive screws.

    • Lift the hard drive up and out of the device.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 6

Total : 708