Introduction

This guide will show you how to replace your device's battery without any hiccups. You will need one Phillips #0 screwdriver and one plastic spudger.

Pièces

Aucune pièce nécessaire.

First flip over the laptop to expose the back panel
  • First flip over the laptop to expose the back panel

  • Use a Phillips #0 screwdriver to unscrew all ten 7mm Phillips head screws holding the back panel in place.

Ajouter un commentaire

With a plastic spudger, carefully remove the back panel by prying each corner off individually
  • With a plastic spudger, carefully remove the back panel by prying each corner off individually

  • Slowly pick up the panel and set it aside

Ajouter un commentaire

  • The battery will be the largest black component in the device located near the bottom edge. Using a Phillips #0 screwdriver, unscrew the two 3mm Phillips head screws holding in the battery.

Ajouter un commentaire

  • To remove the old battery, slightly lift the bottom edge of the battery with your hands

  • Now slowly pull the battery towards you to fully detach the battery

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Valentin Medina

Membre depuis le 30/01/2018

437 Réputation

3 tutoriels rédigés

Équipe

Baylor, Team S1-G6, Johnson Spring 2018 Membre de l'équipe Baylor, Team S1-G6, Johnson Spring 2018

BU-JOHNSON-S18S1G6

3 membres

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 2

7 derniers jours : 4

30 derniers jours : 20

Total : 128