Introduction

In this guide, we will be showing you how to remove and replace the Display Assembly.

Pièces

Aucune pièce nécessaire.

Follow the instructions in Before You Begin.
  • Follow the instructions in Before You Begin.

  • Turn the computer over.

  • Disconnect the Mini-Card antenna cables from the computer base.

Ajouter un commentaire

Turn the computer over and open the display as far as possible.
  • Turn the computer over and open the display as far as possible.

Ajouter un commentaire

  • Disconnect the display cable and the camera cable from their connectors on the system board.

Ajouter un commentaire

  • Make a note of the routing of the Mini-Card antenna cables and remove the cables from the routing guides.

Ajouter un commentaire

  • Remove the six screws (three on each side) that secure the display assembly to the computer base.

Ajouter un commentaire

  • Lift and remove the display assembly off the computer base.

Ajouter un commentaire

  • Place the NEW display assembly in position and replace the six screws (three on each side) that secure the display assembly to the computer base.

Ajouter un commentaire

  • Route the Mini-Card antenna cables through the slot on the computer base.

Ajouter un commentaire

  • Connect the display cable and the camera cable to their connectors on the system board.

Ajouter un commentaire

Ligne d'arrivée

Terrence15

Membre depuis le 18/12/2017

69 311 Réputation

444 tutoriels rédigés

Équipe

Informative Technologies Inc. Membre de l'équipe Informative Technologies Inc.

Community

15 membres

917 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 1

Total : 10