Introduction
In this guide, we will show you how to remove and replace the Battery.
Ce dont vous avez besoin
-
-
Disconnect the battery cable from the system board.
-
-
-
Remove the four screws (M2x3) that secure the battery to the palm rest and keyboard assembly.
-
-
-
-
Press and hold the power button for five seconds to ground the system board.
-
-
-
Align the screw holes on the NEW battery with the screw holes on the palm rest and keyboard assembly.
-
-
-
Replace the four screws (M2x3) that secure the battery to the palm rest and keyboard assembly.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
Une autre personne a terminé cette réparation.
Un commentaire
Grounding the System Board is required after removing battery?