Introduction

In this guide, we will show you how to remove and replace the Hard Drive.

Pièces

Aucune pièce nécessaire.

WARNING: Before working inside your computer, read the safety information that shipped with your computer. Follow the instructions in Before You Begin.
  • WARNING: Before working inside your computer, read the safety information that shipped with your computer. Follow the instructions in Before You Begin.

  • CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer).

  • Remove the two screws that secure the hard-drive assembly to the computer base.

Ajouter un commentaire

Slide the hard-drive assembly out of the hard-drive compartment.
  • Slide the hard-drive assembly out of the hard-drive compartment.

Ajouter un commentaire

  • Remove the two screws that secure the hard-drive bezel to the hard drive.

Ajouter un commentaire

  • Pull the hard-drive bezel away from the hard drive.

Ajouter un commentaire

  • Align the screw holes on the NEW hard-drive bezel with the screw holes on the hard drive and replace the two screws.

Ajouter un commentaire

  • Slide the hard-drive assembly into the hard-drive compartment until it is fully seated.

Ajouter un commentaire

  • Replace the two screws that secure the hard-drive assembly to the computer base.

Ajouter un commentaire

Ligne d'arrivée

Terrence15

Membre depuis le 18/12/2017

69 311 Réputation

444 tutoriels rédigés

Équipe

Informative Technologies Inc. Membre de l'équipe Informative Technologies Inc.

Community

15 membres

917 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 5

Total : 21