Introduction

In this guide, we will be showing you how to remove and replace the Hard Drive.

Pièces

Aucune pièce nécessaire.

CAUTION: Before working inside your computer, Follow the procedures in  Before You Begin.
  • CAUTION: Before working inside your computer, Follow the procedures in Before You Begin.

  • Turn the computer over.

  • Loosen the two captive screws securing the hard drive cover and then remove the cover.

Ajouter un commentaire

Remove the hard drive assembly using the pull-tab.
  • Remove the hard drive assembly using the pull-tab.

Ajouter un commentaire

  • Remove the two screws securing the hard drive to the hard drive assembly.

Ajouter un commentaire

  • Slide out the hard drive from the hard drive assembly.

Ajouter un commentaire

  • Slide the NEW hard drive in the hard drive assembly.

  • NOTICE: Use firm and even pressure to slide the drive into place. If you use excessive force, you may damage the connector.

Ajouter un commentaire

  • Tighten the two screws to secure the hard drive to the hard drive assembly.

Ajouter un commentaire

  • Place the hard drive assembly in the hard drive bay by aligning the tabs on the hard drive assembly with the slots in the bay and pressing the connector end down.

Ajouter un commentaire

  • Replace the hard drive door and tighten the screws.

Ajouter un commentaire

Ligne d'arrivée

Terrence15

Membre depuis le 18/12/2017

69 301 Réputation

444 tutoriels rédigés

Équipe

Informative Technologies Inc. Membre de l'équipe Informative Technologies Inc.

Community

15 membres

917 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 2

Total : 13