Introduction

In this guide, we will be showing you how to remove and replace the Display Assembly.

Pièces

Aucune pièce nécessaire.

WARNING: Before working inside your computer, read the safety information that shipped with your computer. Follow the instructions in "Before You Begin".
  • WARNING: Before working inside your computer, read the safety information that shipped with your computer. Follow the instructions in "Before You Begin".

  • CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer).

  • Remove the two screws from the computer base.

Ajouter un commentaire

Loosen the display cable grounding screw.
  • Loosen the display cable grounding screw.

Ajouter un commentaire

  • Disconnect the display cable from the connector on the system board.

Ajouter un commentaire

  • Remove the four screws that secure the display assembly to the computer base.

Ajouter un commentaire

  • Lift the display assembly off the computer base.

Ajouter un commentaire

  • Place the NEW display assembly in position and replace the four screws that secure the display assembly to the computer base.

Ajouter un commentaire

  • Route the display cable and Mini-Card antenna cables through the routing guides.

Ajouter un commentaire

  • Connect the display cable to the connector on the system board.

Ajouter un commentaire

  • Tighten the display cable grounding screw.

Ajouter un commentaire

  • Replace the two screws at the bottom of the computer.

Ajouter un commentaire

Ligne d'arrivée

Terrence15

Membre depuis le 18/12/2017

69 271 Réputation

444 tutoriels rédigés

Équipe

Informative Technologies Inc. Membre de l'équipe Informative Technologies Inc.

Community

15 membres

917 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 9