Réparez vos affaires Communauté Boutique

Dell Inspiron 14R Display Assembly Replacement

Introduction

In this guide, we will show you how to remove and replace the Display Assembly.

Ce dont vous avez besoin

  1. Dell Inspiron 14R Display Assembly Replacement, Remove the Screws: étape 1, image 1 de 1

    • WARNING: Before working inside your computer, read the safety information that shipped with your computer. Follow the instructions in "Before You Begin".

    • CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer).

    • Remove the two screws from the computer base.

    Modifier

  2. Dell Inspiron 14R Display Assembly Replacement, Loosen the Cable: étape 2, image 1 de 1

    • Loosen the display cable grounding screw.

    Modifier

  3. Dell Inspiron 14R Display Assembly Replacement, Disconnect the Display Cable: étape 3, image 1 de 1

    • Disconnect the display cable from the connector on the system board.

    Modifier

  4. Dell Inspiron 14R Display Assembly Replacement, Remove the Screws: étape 4, image 1 de 1

    • Remove the four screws that secure the display assembly to the computer base.

    Modifier

  6. Dell Inspiron 14R Display Assembly Replacement, Lifting the Display Assembly: étape 5, image 1 de 1

    • Lift the display assembly off the computer base.

    Modifier

  7. Dell Inspiron 14R Display Assembly Replacement, Place the Display Assembly: étape 6, image 1 de 1

    • Place the NEW display assembly in position and replace the four screws that secure the display assembly to the computer base.

    Modifier

  8. Dell Inspiron 14R Display Assembly Replacement, Routing the Cable: étape 7, image 1 de 1

    • Route the display cable and Mini-Card antenna cables through the routing guides.

    Modifier

  9. Dell Inspiron 14R Display Assembly Replacement, Connect the Display Cable: étape 8, image 1 de 1

    • Connect the display cable to the connector on the system board.

    Modifier

  10. Dell Inspiron 14R Display Assembly Replacement, Tighten the Grounding Screw: étape 9, image 1 de 1

    • Tighten the display cable grounding screw.

    Modifier

  11. Dell Inspiron 14R Display Assembly Replacement, Replace the Screws: étape 10, image 1 de 1

    • Replace the two screws at the bottom of the computer.

    Modifier
Ligne d'arrivée

Auteur

avec 1 autre contributeur

Terrence15

Membre depuis le 12/18/17

79 091 Réputation

441 tutoriels rédigés

Badges: 28

+ 25 badges supplémentaires

Équipe

RampUP America, Inc. Membre de l'équipe RampUP America, Inc.

Community

42 membres

1 985 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 1

Total : 232