Introduction

In this guide, we will be showing you how to remove and replace the Hard Drive.

Pièces

Aucune pièce nécessaire.

WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer.
  • WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer.

  • CAUTION: Hard drives are fragile. Exercise care when handling the hard drive.

  • Open the latch and disconnect the hard-drive cable from the system board.

Ajouter un commentaire

Remove the four screws (M2x3) that secure the hard-drive assembly to the palm-rest assembly.
  • Remove the four screws (M2x3) that secure the hard-drive assembly to the palm-rest assembly.

Ajouter un commentaire

  • Lift the hard-drive assembly off the palm-rest assembly.

Ajouter un commentaire

  • Disconnect the interposer from the hard-drive assembly.

Ajouter un commentaire

  • Remove the four screws (M3x3) that secure the hard-drive bracket to the hard drive.

Ajouter un commentaire

  • Lift the hard drive off the hard-drive bracket.

Ajouter un commentaire

  • Align the screw holes on the hard-drive bracket with the screw holes on the NEW hard drive.

Ajouter un commentaire

  • Replace the four screws (M3x3) that secure the hard-drive bracket to the hard drive.

Ajouter un commentaire

  • Connect the interposer to the hard drive.

Ajouter un commentaire

  • Place the hard-drive assembly in the palm-rest assembly and align the screw holes on the hard-drive assembly with the screw holes on the palm-rest assembly.

Ajouter un commentaire

  • Replace the four screws (M2x3) that secure the hard-drive assembly to the palm-rest assembly.

Ajouter un commentaire

  • Slide the hard-drive cable into its connector on the system board and close the latch to secure the cable.

Ajouter un commentaire

Ligne d'arrivée

Terrence15

Membre depuis le 18/12/2017

69 311 Réputation

444 tutoriels rédigés

Équipe

Informative Technologies Inc. Membre de l'équipe Informative Technologies Inc.

Community

15 membres

917 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 2

7 derniers jours : 12

30 derniers jours : 37

Total : 84