Introduction
In this guide, we will be showing you how to remove and replace the Battery.
Ce dont vous avez besoin
-
-
Remove the battery cable from the routing guides on the computer base.
-
-
-
Remove the five screws (M2x5 T8) that secure the battery to the computer base.
-
-
-
Using the pull tab, lift the battery, along with its cable, off the computer base.
-
-
-
-
Turn the computer over, open the display, and press and hold the power button for five seconds to ground the system board.
-
-
-
Align the screw holes on the battery with the screw holes on the computer base.
-
-
-
Replace the five screws (M2x5 T8) that secure the battery to the computer base.
-
-
-
Route the battery cable through the routing guides on the computer base.
-
Annulation : je n'ai pas terminé ce tutoriel.
Une autre personne a terminé cette réparation.
2 commentaires
the only instruction missing is how to tale the back off. if that was included it would be great