Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Introduction

In this guide, we will be showing you how to remove and replace the Display Assembly.

Pièces

Aucune pièce spécifiée.

  1. WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer.  After working inside your computer, follow the instructions in After Working Inside Your Computer.

    Step one incorrectly identifies the display cable as the battery cable. I think I blew the mobo reattaching the display cable. A small pop and some ozone scent leads me to believe that.

    Quietech - Réponse

    Make your 1st step removing the back cover. Dell Inspiron 15-5567 Back Cover Replacement

    Quietech - Réponse

  2. Note the display cable routing and remove the cable from its routing guides.
    • Note the display cable routing and remove the cable from its routing guides.

  3. Lift the latch and disconnect the display cable from the system board. Lift the latch and disconnect the display cable from the system board.
    • Lift the latch and disconnect the display cable from the system board.

  4. Remove the screws that secure the display hinges to the palm rest and keyboard assembly.
    • Remove the screws that secure the display hinges to the palm rest and keyboard assembly.

  5. SAUTEZ LA MISE À NIVEAU

    Économisez en réparant avec un kit tout-en-un.

    Fix Kits pour iPhone

    SAUTEZ LA MISE À NIVEAU

    Économisez en réparant avec un kit tout-en-un.

    Fix Kits pour iPhone
  6. Open the display hinges.
    • Open the display hinges.

  7. Lift the palm rest and keyboard assembly off the display assembly.
    • Lift the palm rest and keyboard assembly off the display assembly.

  8. Place the palm rest and keyboard assembly on the NEW display assembly.
    • Place the palm rest and keyboard assembly on the NEW display assembly.

  9. Using the alignment posts, press the display hinges down on the palm rest and keyboard assembly.
    • Using the alignment posts, press the display hinges down on the palm rest and keyboard assembly.

  10. Replace the screws that secure the display hinges to the palm rest and keyboard assembly.
    • Replace the screws that secure the display hinges to the palm rest and keyboard assembly.

  11. Route the display cable through the routing guides on the palm rest and keyboard.
    • Route the display cable through the routing guides on the palm rest and keyboard.

  12. Slide the display cable to the connector on the system board and close the latch to secure the cable.
    • Slide the display cable to the connector on the system board and close the latch to secure the cable.

    • Slide the battery cable to the connector on the system board.

Ligne d'arrivée

Une autre personne a terminé cette réparation.

Terrence15

Membre depuis le 18/12/2017

72 516 Réputation

442 tutoriels rédigés

Équipe

Informative Technologies Inc. Membre de l'équipe Informative Technologies Inc.

Community

21 membres

1 824 tutoriels rédigés

Nice, is the part available?

gideon onwuka - Réponse

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 2

7 derniers jours : 9

30 derniers jours : 39

Total : 1,041