Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Introduction

The guide shows the process of removing the RAM from the Dell Insprion 15-7547.

Pièces

Aucune pièce spécifiée.

  1. Before you begin, be sure to turn off your laptop and unplug it from the outlet.
    • Before you begin, be sure to turn off your laptop and unplug it from the outlet.

    • Close the display and flip the laptop on its back.

    • Loosen the ten 5.0 mm-long Phillips #0 screws.

    • The four screws marked with orange will remain captive to the cover.

  2. Use a spudger to pry up and loosen the back cover.
    • Use a spudger to pry up and loosen the back cover.

    • Remove the back cover.

  3. Remove the plastic heat spreader that covers the RAM sticks. Remove the plastic heat spreader that covers the RAM sticks. Remove the plastic heat spreader that covers the RAM sticks.
    • Remove the plastic heat spreader that covers the RAM sticks.

  4. Release the clamps on each side of the RAM sticks by pushing away from the center. When done properly the RAM stick should pop up.
    • Release the clamps on each side of the RAM sticks by pushing away from the center.

    • When done properly the RAM stick should pop up.

  5. Pull the RAM stick in a straight line out of the socket. Pull the RAM stick in a straight line out of the socket.
    • Pull the RAM stick in a straight line out of the socket.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Claro

Membre depuis le 10/09/2018

576 Réputation

5 tutoriels rédigés

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 153