Introduction
In this guide, we will be showing you how to remove and replace the Display Assembly.
Ce dont vous avez besoin
-
-
Disconnect the display cable from the connectors on the system board.
-
-
-
Disconnect the wireless mini-card cables from the connectors on the wireless mini-card.
-
-
-
-
Remove the screws that secure the display assembly to the computer base.
-
-
-
Place the NEW display assembly on the computer base and align the screw holes on the display assembly with the screw holes on the computer base.
-
-
-
Replace the screws that secure the display assembly to the computer base.
-
-
-
Connect the wireless mini-card cables to the connectors on the wireless mini-card.
-
-
-
Connect the display cable to the connector on the system board.
-
-
-
Adhere the tape that secures the display cable to the system board.
-
Annulation : je n'ai pas terminé ce tutoriel.
Une autre personne a terminé cette réparation.