Introduction
How to remove and replace the hard-drive
Ce dont vous avez besoin
-
-
Lift the latch and disconnect the hard-drive cable from the system board.
-
-
-
Remove the screws that secure the hard-drive assembly to the palm rest and keyboard assembly.
-
-
-
Lift the hard-drive assembly from the palm rest and keyboard assembly.
-
-
-
Remove the screws that secure the hard-drive bracket to the hard drive.
-
-
-
-
Align the screw holes on the hard-drive bracket with the screw holes on the hard drive.
-
-
-
Replace the screws that secure the hard-drive bracket to the hard drive.
-
-
-
Place the hard-drive assembly on the palm rest and keyboard assembly and align the screw holes on the hard-drive assembly with the screw holes on the palm rest and keyboard assembly
-
-
-
Replace the screws that secure the hard-drive assembly to the palm rest and keyboard assembly.
-
-
-
Slide the hard-drive cable into the connector on the system board and close the latch to secure the cable.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.