Aller au contenu principal

Introduction

The Hard Drive is simple to remove. It is important that you do NOT drop or shake the hard-drive when it is out of its harness. This may harm the device further and render your stored data useless.

If there are important pictures, documents, or files on the drive that you do not want to lose, go to a local computer store and they should be able to let you know if the data is recoverable.

Pièces

Aucune pièce spécifiée.

  1. Disconnect the Laptop from the AC adapter and turn off the Laptop.
    • Disconnect the Laptop from the AC adapter and turn off the Laptop.

  2. Place laptop so the bottom  faces up.
    • Place laptop so the bottom faces up.

  3. Remove the silver 15mm PH1 screw that holds the plastic cover in place over the battery. Remove the 8mm PH 1 screw that holds the plastic cover in place over the battery. Place the screws accordingly because the length of the screws will matter when you reassemble.
    • Remove the silver 15mm PH1 screw that holds the plastic cover in place over the battery.

    • Remove the 8mm PH 1 screw that holds the plastic cover in place over the battery.

    • Place the screws accordingly because the length of the screws will matter when you reassemble.

  4. Using a metal jimmy, pry up to remove the first half of the cover.
    • Using a metal jimmy, pry up to remove the first half of the cover.

  5. Fix Kits pour iPhone X

    Finie la garantie ? Pas de soucis, nous avons de quoi réparer.

    Acheter maintenant

    Fix Kits pour iPhone X

    Finie la garantie ? Pas de soucis, nous avons de quoi réparer.

    Acheter maintenant
  6. Apply pressure using your fingertips on the top of the cover, pushing to the front of the laptop. This will make the plate slide off exposing the hard drive.
    • Apply pressure using your fingertips on the top of the cover, pushing to the front of the laptop. This will make the plate slide off exposing the hard drive.

  7. Remove the three black PH1 6mm screws that anchor the hard drive. This screw hole will be empty because the 15mm silver screw that holds the plastic cover will anchor the hard drive down. This screw hole will be empty because the 15mm silver screw that holds the plastic cover will anchor the hard drive down.
    • Remove the three black PH1 6mm screws that anchor the hard drive.

    • This screw hole will be empty because the 15mm silver screw that holds the plastic cover will anchor the hard drive down.

  8. Using the Jimmy, pry up the hard drive and lift out using your fingers.
    • Using the Jimmy, pry up the hard drive and lift out using your fingers.

  9. Gently wiggle and pull the connector to disconnect the Seta Cable attaching the hard drive to the laptop.
    • Gently wiggle and pull the connector to disconnect the Seta Cable attaching the hard drive to the laptop.

  10. Remove the harness around the hard drive by removing four black 4mm PH1 screws located on the side. Remove the harness around the hard drive by removing four black 4mm PH1 screws located on the side. Remove the harness around the hard drive by removing four black 4mm PH1 screws located on the side.
    • Remove the harness around the hard drive by removing four black 4mm PH1 screws located on the side.

  11. Remove the hard drive from the harness.
    • Remove the hard drive from the harness.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Joshua Plagerman

Membre depuis le 26/09/2018

699 Réputation

4 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 10

Total : 160