Introduction

Is your device experiencing problems with holding a charge or turning on? Consider using this guide to replace the battery in your device.

  1. Ensure the device is powered off and unplugged. Close the device and orient it face up, with the hinges further away from you. Flip the device over so the backside is facing you.
    • Ensure the device is powered off and unplugged. Close the device and orient it face up, with the hinges further away from you.

    • Flip the device over so the backside is facing you.

  2. Using the Phillips #1 screwdriver, remove all nine 7mm screws.
    • Using the Phillips #1 screwdriver, remove all nine 7mm screws.

  3. Using the plastic opening tool, pull the back panel upward. Move the opening tool along the edge of the device and lift the panel off of your device. Be aware, the back panel is kept in place by magnetic clips. They will offer some resistance, but continue to gently leverage upwards.
    • Using the plastic opening tool, pull the back panel upward. Move the opening tool along the edge of the device and lift the panel off of your device.

    • Be aware, the back panel is kept in place by magnetic clips. They will offer some resistance, but continue to gently leverage upwards.

  4. %Livraison gratuite pour toute commande supérieure à 100 $US ou contenant un Pro Tech Toolkit !

    Parcourez notre boutique
  5. Remove the three 4mm screws holding battery in place using the Phillips #0 screwdriver.
    • Remove the three 4mm screws holding battery in place using the Phillips #0 screwdriver.

  6. Using the iFixit opening tools, lift the battery out of its housing.
    • Using the iFixit opening tools, lift the battery out of its housing.

  7. Once loosened, use your fingers to lift the battery up and out of its housing.
    • Once loosened, use your fingers to lift the battery up and out of its housing.

    • There is a small cable which sits in a rut in the top of the battery. Ensure that it is pushed out of the way before removing completely.

  8. Remove the battery completely.
    • Remove the battery completely.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Christopher Gravelle

Membre depuis le 23/10/2018

706 Réputation

7 tutoriels rédigés

Équipe

UMass Dartmouth, Team S1-G2, Simcock Fall 2018 Membre de l'équipe UMass Dartmouth, Team S1-G2, Simcock Fall 2018

UMASSD-SIMCOCK-F18S1G2

3 membres

7 tutoriels rédigés

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 6

Total : 63