Aller au contenu principal

Introduction

The PCI slot can hold many different types of cards, such as a dial up modem, wifi receiver, or bluetooth.

Outils

Pièces

Aucune pièce spécifiée.

  1. Unscrew the two large screws in the back holding on the side panel. Slide the panel backwards to remove it.
    • Unscrew the two large screws in the back holding on the side panel.

    • Slide the panel backwards to remove it.

  2. The PCI slots are located at the bottom back of the computer. Unscrew the screw to release the metal piece that holds the cards in place. Remove metal piece.
    • The PCI slots are located at the bottom back of the computer.

    • Unscrew the screw to release the metal piece that holds the cards in place.

    • Remove metal piece.

  3. Slide the card in the PCI slot up and out. In this case, it is a dial up modem.
    • Slide the card in the PCI slot up and out.

    • In this case, it is a dial up modem.

  4. Take the new card and slide it into the slot that you removed the old one out of. Remember to replace the metal piece you removed earlier to secure the cards in place. Remember to replace the metal piece you removed earlier to secure the cards in place.
    • Take the new card and slide it into the slot that you removed the old one out of.

    • Remember to replace the metal piece you removed earlier to secure the cards in place.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Drew Cunningham

Membre depuis le 25/03/2015

566 Réputation

5 tutoriels rédigés

Équipe

UMass Dartmouth, Team 5-1, Kish Spring 2015 Membre de l'équipe UMass Dartmouth, Team 5-1, Kish Spring 2015

UMASSD-KISH-S15S5G1

5 membres

10 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 4

30 derniers jours : 9

Total : 583