Introduction

Follow this guide to remove the display module.

Pièces

Aucune pièce nécessaire.

Remove the battery from the bottom of the laptop.
  • Remove the battery from the bottom of the laptop.

  • Please click on the following link for further instruction on how to remove the battery. Dell Inspiron 9100 Battery Replacement

  • It is important to remove the battery so that you will not be electrocuted while working with the computer's hardware.

Ajouter un commentaire

Insert a spludger into the notch at the far left side of the top blue panel and pry hinge cover off.
  • Insert a spludger into the notch at the far left side of the top blue panel and pry hinge cover off.

  • Note: You may need to pry the other side off by inserting the spludger between the hinge and the top cover.

  • Be careful of wire attached to underside of the hinge cover.

Ajouter un commentaire

  • Pull the small black tab on the right hand side of the laptop.

  • The hinge cover has now been removed.

Ajouter un commentaire

  • Flip the laptop over and remove the indicated screws.

  • Flip the laptop back over.

  • Find the two places where the display module is attached to the base of the computer.

Ajouter un commentaire

  • Disconnect the video card from the display module by gently lifting upwards on the black tab.

Ajouter un commentaire

  • Lift the display module directly upwards from the base of the computer.

Ajouter un commentaire

  • The display module has been removed.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autre(s) ont terminé cette réparation.

Victor

Membre depuis le 06/04/2011

187 Réputation

1 tutoriel rédigé

Équipe

Cal Poly, Team 18-22, Garner Spring 2011 Membre de l'équipe Cal Poly, Team 18-22, Garner Spring 2011

CPSU-GARNER-S11S18G22

4 membres

16 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 3,508