Réparez vos affaires Communauté Boutique

Ce tutoriel a des changements plus récents. Passer à la dernière version non vérifiée.

Dell Inspiron 8600 LCD Replacement

Introduction

Follow this guide to remove the LCD Display.

Ce dont vous avez besoin

  1. Dell Inspiron 8600 LCD Replacement, Hinge Cover: étape 1, image 1 de 3 Dell Inspiron 8600 LCD Replacement, Hinge Cover: étape 1, image 2 de 3 Dell Inspiron 8600 LCD Replacement, Hinge Cover: étape 1, image 3 de 3

    • Insert a spudger into the notch at the far left side of the top blue panel and pry the hinge cover off.

    • You may need to pry the other side off as well. You can do this by inserting the spudger between the hinge and the top cover.

    • Be careful of the wire attached to the underside of the hinge cover.

    Traduire

  2. Dell Inspiron 8600 LCD Replacement: étape 2, image 1 de 1

    • Pull the small black tab on the right hand side of the laptop.

    • You have now removed the hinge cover.

    Traduire

  3. Dell Inspiron 8600 LCD Replacement, Display Module: étape 3, image 1 de 2 Dell Inspiron 8600 LCD Replacement, Display Module: étape 3, image 2 de 2

    • Flip the laptop over and remove the indicated screws.

    • Flip the laptop back over.

    • Find the two places where the display module is attached to the base of the computer.

    Traduire

  4. Dell Inspiron 8600 LCD Replacement: étape 4, image 1 de 1

    • Disconnect the video card from the display module by gently lifting upwards on the black tab.

    Traduire

  6. Dell Inspiron 8600 LCD Replacement: étape 5, image 1 de 2 Dell Inspiron 8600 LCD Replacement: étape 5, image 2 de 2

    • Lift the display module directly upwards from the base of the computer.

    Traduire

  7. Dell Inspiron 8600 LCD Replacement: étape 6, image 1 de 1

    • Now remove the display module.

    Traduire

  8. Dell Inspiron 8600 LCD Replacement, LCD: étape 7, image 1 de 3 Dell Inspiron 8600 LCD Replacement, LCD: étape 7, image 2 de 3 Dell Inspiron 8600 LCD Replacement, LCD: étape 7, image 3 de 3

    • First, remove the plastic tabs that are covering the interior screws.

    • After removing the tabs, remove the interior screws using a #1 Philips Screwdriver.

    • Note there are 8 tabs and 8 screws in total.

    Traduire

  9. Dell Inspiron 8600 LCD Replacement: étape 8, image 1 de 1

    • Now that the screws are removed, press the plastic casing inward to loosen the case. Then remove the plastic case from the monitor unit.

    Traduire

  10. Dell Inspiron 8600 LCD Replacement: étape 9, image 1 de 1

    • Using a Philips #1 screwdriver remove the screws holding the LCD in place.

    • Note there are 8 screws in total for this step, 4 on each side of the unit.

    Traduire

  11. Dell Inspiron 8600 LCD Replacement: étape 10, image 1 de 1

    • Remove the broken LCD unit, and replace with new unit.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autres ont terminé cette réparation.

Auteur

avec 5 autres contributeurs

Perry

Membre depuis le 04/12/11

251 Réputation

4 tutoriels rédigés

Badges: 12

+ 9 badges supplémentaires

Équipe

Cal Poly, Team 18-22, Garner Spring 2011 Membre de l'équipe Cal Poly, Team 18-22, Garner Spring 2011

CPSU-GARNER-S11S18G22

4 membres

16 tutoriels rédigés

Un commentaire

which controller board do i have to use for this model ?

bcdoor - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 4

Total : 4,637