Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.
Ce dont vous avez besoin
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Flip the laptop so the battery is facing upwards.
-
Push the battery release tabs toward the center of the device.
-
Remove the battery.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Using a plastic opening tool, pry the front silver bezel away from the colored plastic shell.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Unscrew the two screws using a Phillips #00 screwdriver from the metal casing that retains the screen.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Pull down the laptop's back, keeping the screen upright, held in place by two metal strips going along its sides.
-
Unscrew the 4 screws from the two strips.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Gently lay the screen down, being careful not to damage the ribbon connector.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Disconnect the cord connecting the screen to the rest of the laptop. The cable will be attached to the screen using tape, so it can be safely removed. The actual cord connection is at the circuit board.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Pull the screen out. Congratulations! You have removed the screen.
-
Annulation : je n'ai pas terminé ce tutoriel.
2 autres ont terminé cette réparation.