Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Introduction

This guide requires a Phillips #00 screwdriver

Pièces

Aucune pièce spécifiée.

  1. Unplug the laptop from the power adapter and turn the power off. Failure to unplug laptop before proceeding could result in risk of electric shock! Failure to unplug laptop before proceeding could result in risk of electric shock!
    • Unplug the laptop from the power adapter and turn the power off.

    • Failure to unplug laptop before proceeding could result in risk of electric shock!

  2. OUVRIR TOUS LES ONGLETS

    Kits de mise à jour de RAM pour Mac

    Voir les kits

    Assez de RAM
    pour ouvrir tous les onglets

    Voir les kits
  3. Slide the battery-lock tab and hold. Flip the battery away from the chassis to remove it. Flip the battery away from the chassis to remove it.
    • Slide the battery-lock tab and hold.

    • Flip the battery away from the chassis to remove it.

  4. Undo the two screws on the fan cover plate labeled "F3", they will remain in the panel. These screws will remain in the panel Lift up on the side of the fan nearest the screws to release the fan module
    • Undo the two screws on the fan cover plate labeled "F3", they will remain in the panel.

    • These screws will remain in the panel

    • Lift up on the side of the fan nearest the screws to release the fan module

Conclusion

To reassemble your device, follow these instructions in reverse order.

charlierefvem

Membre depuis le 11/01/2011

854 Réputation

7 tutoriels rédigés

Équipe

Cal Poly, Team 13-2, Forte Winter 2011 Membre de l'équipe Cal Poly, Team 13-2, Forte Winter 2011

CPSU-FORTE-W11S13G2

5 membres

8 tutoriels rédigés

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 1,879