Introduction

This guide requires a Phillips #00 screwdriver

Pièces

Aucune pièce nécessaire.

  1. Unplug the laptop from the power adapter and turn the power off.
    • Unplug the laptop from the power adapter and turn the power off.

    • Failure to unplug laptop before proceeding could result in risk of electric shock!

    Ajouter un commentaire

  2. Slide the battery-lock tab and hold.
    • Slide the battery-lock tab and hold.

    • Flip the battery away from the chassis to remove it.

    Ajouter un commentaire

    • Undo the screw on the Mini-PCI card cover labeled "C"

    • This screw will remain within the panel

    • Remove the panel from the chassis.

    Ajouter un commentaire

    • Disconnect the antenna cables from the Mini-PCI card.

    Ajouter un commentaire

    • Use your fingertips to carefully spread apart the white plastic tabs.

    • Flip the Mini-PCI card up at a 45 degree angle.

    • Remove the card from the computer by sliding out diagonally

    • Ground yourself while dealing with the card. Static shock can cause damage to the card. Store the card in anti-static bag when not in use.

    Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

charlierefvem

Membre depuis le 11/01/2011

854 Réputation

7 tutoriels rédigés

Équipe

Cal Poly, Team 13-2, Forte Winter 2011 Membre de l'équipe Cal Poly, Team 13-2, Forte Winter 2011

CPSU-FORTE-W11S13G2

5 membres

8 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 6

Total : 3,983