Aller au contenu principal

Introduction

This guide describes how to access the modem card and replace it.

Pièces

Aucune pièce spécifiée.

    • Flip the computer over and place it on a clean level surface.

    • Loosen the screws using a size #0 Phillips screwdriver.

    • The screws do not come completely out.

    • It is strongly recommended that the Anti-Static Wrist Strap is used to avoid damage to internal components.

  1. Once the screws are loose, open the panel using a plastic opening tool to access the components below. The modem card should be labeled MODEM. The WIFI card is larger than the modem and closer to the outer edge of the computer.
    • Once the screws are loose, open the panel using a plastic opening tool to access the components below.

    • The modem card should be labeled MODEM. The WIFI card is larger than the modem and closer to the outer edge of the computer.

  2. Remove the screw holding the card in place using a size #0 Phillips screwdriver. Gently unplug the card from the connecting black wire using a black spudger.
    • Remove the screw holding the card in place using a size #0 Phillips screwdriver.

    • Gently unplug the card from the connecting black wire using a black spudger.

    • The modem can now be safely removed.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Randy McMillan

Membre depuis le 21/09/2016

738 Réputation

4 tutoriels rédigés

Équipe

Master Techs Membre de l'équipe Master Techs

Community

300 membres

1 005 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 110