Aller au contenu principal

Introduction

Upgrade or replace the ram in your Dell Inspiron 9300

    • Flip the computer over and place it on a clean level surface.

    • Loosen the screws using a #0 Phillips screw driver.

    • It is strongly recommended that the Anti-Static Wrist Strap is used to avoid damage to internal components.

    • The screws are secured by retainer clips in the plastic panel and are not fully removable.

  1. Remove the plastic panel.
    • Remove the plastic panel.

    • Carefully pry away the retaining clips on either side of the ram modules using a spudger tool, until the card pops away from the motherboard.

    • Repeat for the second ram module if necessary.

  2. Carefully pull the ram modules out of it's slot, away from the motherboard.
    • Carefully pull the ram modules out of it's slot, away from the motherboard.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Randy McMillan

Membre depuis le 21/09/2016

738 Réputation

4 tutoriels rédigés

Équipe

Master Techs Membre de l'équipe Master Techs

Community

300 membres

1 005 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 216