Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.
Ce dont vous avez besoin
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Use a spudger to remove the six rubber nibs and 2 plastic pieces on the bezel of the display.
-
Remove the eight Phillips #0 screws hidden under the rubber nibs and plastic pieces.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Pry the plastic bezel from the back plate using a plastic opening tool.
-
Remove the plastic bezel entirely and set it aside.
-
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the 4 screws along the left and right sides of the screen. There are 8 screws in total.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Use the spudger to separate the screen from the back case.
-
Hold the screen in one hand and tilt the back case away from you.
-
The screen is connected to the back case by two leads.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the two leads from the screen. They will stay connected to the computer.
-
Remove the screen carefully.
-
Annulation : je n'ai pas terminé ce tutoriel.
9 autres ont terminé cette réparation.