Introduction

This replacement guide will not take much time. It requires replacement or upgraded RAM.

Pièces

Aucune pièce nécessaire.

Make sure the laptop is off and unplugged before starting this step.
  • Make sure the laptop is off and unplugged before starting this step.

  • Locate the battery on the underside of the laptop.

  • Push the two battery clips following the direction of the arrows.

Ajouter un commentaire

Push upward from the base of the battery.
  • Push upward from the base of the battery.

Ajouter un commentaire

  • Pull battery away from computer until it is fully removed.

Ajouter un commentaire

  • Locate and unscrew the one 2.5x5 mm screw on the cover.

  • The screw does not detach from the cover. Make sure the screw is fully unscrewed before attempting to remove the cover.

Ajouter un commentaire

  • Remove RAM cover from the laptop.

Ajouter un commentaire

  • Use your fingers to separate the two metal clips from the RAM.

  • The RAM will lift up when properly separated. Do not force the RAM out of the clips.

Ajouter un commentaire

  • Remove the RAM from the computer.

  • Be careful as to not touch the metal on the bottom of the RAM. This can cause damage.

  • The RAM should be placed on a non-conductive surface.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Olivia

Membre depuis le 20/03/2018

593 Réputation

3 tutoriels rédigés

Équipe

UMass Dartmouth, Team S5-G1, Peak Spring 2018 Membre de l'équipe UMass Dartmouth, Team S5-G1, Peak Spring 2018

UMASSD-PEAK-S18S5G1

3 membres

6 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 3

7 derniers jours : 5

30 derniers jours : 9

Total : 36