Ce dont vous avez besoin
-
-
-
Remove the four screws (two on each side) that attach the hard drive cage to the hard drive.
-
Lift the hard drive cage off the hard drive.
Excellent guide, was a super easy swap. I put an SSD in it!!
Hey Just one question, is the HDD SATA 2 or SATA 3? Just wanted to know so I can purchase an SDD with the correct specification.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
35 autres ont terminé cette réparation.
3 commentaires
Thanks for this info this is very useful
Thank you once again
Really useful information thank you.